Coulisse CM-10-QMC120 Mechanical Tubular Motor
The Coulisse CM-10-QMC120 is a quiet, heavy-duty mechanical tubular motor designed for compatible hardwired Roman shade systems. Its 35 mm motor body delivers 8 Nm of torque at 17 rpm, providing dependable lifting power for larger window-covering applications.
The motor operates directly from a 120V AC power supply and is controlled through a compatible wired wall switch, relay or building-control interface. Mechanical upper and lower limits are adjusted at the motor, allowing the installer to set the shade travel without radio programming.
Unlike the CM-10-QC120 radio model, the CM-10-QMC120 does not include built-in wireless technology. Remote, app or smart-building control requires a separate compatible external controller.
Key Features
- 35 mm mechanical tubular motor
- Maximum torque: 8 Nm
- Operating speed: 17 rpm
- Direct 120V AC hardwired power
- Mechanical upper and lower limit adjustment
- Compatible with wired switches and properly rated external controls
- Quiet motor operation for interior installations
- Heavy-duty performance for compatible Roman shade systems
- No battery charging required
- No built-in radio or wireless technology
- Can connect to supported building-management systems through compatible external control equipment
Product Specifications
Model CM-10-QMC120
Brand Coulisse Motionblinds
Motor Type Hardwired mechanical tubular motor
Motor Diameter 35 mm
Maximum Torque 8 Nm
Operating Speed 17 rpm
Power Supply Wired AC
Rated Input 120V AC, 60 Hz
Rated Current 0.78 A
Rated Power 102 W
Control Type Compatible wired switch, relay or external controller
Limit Type Mechanical upper and lower limits
Motionblinds Option Hard wired
Integrated Wireless Technology None
Application Compatible Roman shade systems
Compatible Tube Diameters 42 mm, 50 mm, 65 mm and 80 mm with the correct crown and drive adapter
Rated Operating Time 4 minutes
Installation Indoor use only
Compliance Conforms to UL 325 and certified to CSA C22.2 No. 247 as documented for the CM-09/10 (Q)MC motor family
Unit of Measurement Each
Compatibility and Installation
The CM-10-QMC120 must be combined with the correct tube, crown, drive adapter, motor bracket, idler, switch and control equipment for the selected Roman shade system.
Tube diameter alone does not confirm complete compatibility. Before ordering, verify the shade dimensions, fabric and bottom-bar weight, tube deflection, mounting hardware, system load and electrical-control requirements.
This motor connects to 120V AC mains power. Wiring and external controls should be selected and installed by a qualified professional in accordance with the manufacturer instructions and applicable electrical codes. Do not connect multiple motors directly to one single-pole switch or energize both motor directions simultaneously.
What Is Included
One Coulisse CM-10-QMC120 mechanical tubular motor.
Crown, drive adapter, brackets, tube, idler, wall switch, relay, smart controller and other system components are sold separately unless specifically stated in the product listing.
Important Ordering Information
Before ordering, confirm the exact CM-10-QMC120 model, 120V AC power, required torque, tube diameter, crown, drive adapter, bracket, control method and complete Roman shade load. Electrical components that have been wired, installed or modified may not be eligible for return.
Product Documentation
Manual Coulisse CM-10-QMC120 Mechanical Tubular Motor
Two-Year Limited Motor Warranty
This Coulisse motor is covered by a two (2) year limited warranty from the purchase date shown on your Roller Shade Factory invoice.
The warranty covers manufacturing defects under normal use. Proper installation, operation, maintenance, proof of purchase and product inspection are required. Damage caused by misuse, incorrect installation, excessive moisture, extreme temperatures, an opened motor, a broken warranty seal or unauthorized modification is not covered.
Contact Roller Shade Factory to request a warranty evaluation.
