Coulisse RTU-65 Roller Shade Tube
The Coulisse RTU-65 is a 65mm aluminum tube designed for compatible manual and motorized roller shade systems. Its larger profile provides a rigid foundation for constructing wider or heavier roller shades when used within an appropriately engineered system.
The tube features an integrated longitudinal channel extending along its length. It can be cut to the required finished size and combined with compatible Coulisse operating components, brackets, adapters and controls.
Compatible Motors
The Coulisse RTU-65 is shown in official Coulisse system configurations with the following motors:
- Coulisse CM-05
- Coulisse CM-05-E
- Coulisse CM-06
- Coulisse CM-06-E-R
- Coulisse CM-50-E-R
- Coulisse CM-09
- Coulisse CM-10
Motor installation requires the correct crown, drive and tube adapter for the selected motor. Compatibility must also be confirmed according to shade width, fabric weight, roll direction, operating system and required torque.
The RTU-65 can also be used in compatible Coulisse manual chain-operated roller shade systems.
Product Specifications
- Model RTU-65
- Brand Coulisse
- Product Type Aluminum roller shade tube
- Material Aluminum
- Nominal Outside Diameter 65 mm
- Nominal Diameter in Inches Approximately 2.56 inches
- Tube Profile Integrated longitudinal channel running along the tube
- Operation Manual or motorized, depending on the selected components
- Applications Roller shades and double roller shades
- Compatible Motors CM-05, CM-05-E, CM-06, CM-06-E-R, CM-50-E-R, CM-09 and CM-10
- Finish Natural silver aluminum
- Included Component RTU-65 aluminum tube only
- Required Components Compatible operating mechanism or motor, crown, drive, tube adapter, brackets and end components
Coulisse RTU-65 Aluminum Roller Shade Tube – 65mm – Product Specifications & Data Sheet
Important Compatibility Information
The tube is supplied as an individual system component. Motors, adapters, brackets, controls and other hardware are sold separately unless specifically stated otherwise.
Do not select a motor based only on tube diameter. Confirm the complete system configuration, motor torque, fabric weight, finished shade dimensions and required adapters before ordering.
Cut-to-size tubes are custom products and are not returnable. Contact Roller Shade Factory before ordering if you need assistance confirming compatibility.
